Quillas surf FCS AM1 GREEN FLEX TRI-SET.
\rFCS AM1
\rAl Merrick´s medium size signature template. Raked side fins produce exceptional drive, the smaller centre fin offers quick release through turns.
\rIt has a minimal impact on the environment
\rTalla M (65-80KG)
\rJuego de 3 quillas Tri-Fin
Green Flex
\rA new composite fin material made from post-consumer waste. Green Flex (RTM) material is engineered to replicate the strength and flex properties equal to its revolutionary Glass Flex material, yet has a minimal impact on the environment
\rIDEAL CONDITIONS
\rA wide range of conditions from beach breaks to point breaks.
\rBOARD TYPES
\rAll board types.
\rFIN SIZE
\rMEDIUM (65Kg - 80 Kg)
\r\r
FIN SPECS
\rBase: 4.61\" / 117mm
Depth: 4.70\" / 119mm
Area: Area: 15.63\"² / 10083mm²
Sweep: 36.3°
Foil: FLAT
\r | BASE is the length between the leading and trailing edge where the fin meets the board. Base is primarily linked to drive. Fins with a longer base will offer substantially more drive and acceleration. | \r
\r | \r DEPTH is the distance the fin penetrates into the water. Depth directly relates to hold. The greater the depth the more hold, the shorter the depth the more a board will slide and release. \r | \r
\r | AREA is the total surface area of the fin. | \r
\r | \r SWEEP is the angle measuring how far the outline of the fin is curved backwards; also referred to as rake. Sweep has a direct influence on pivot. Fins with more sweep producea longer turning arc, less sweep offers a tighter turning arc. \r | \r
\r | \rFoil refers to the shape and geometry of the inside and outside faces of the fin. Foils directly affect the flow of water over the surface of the fin. Different foils create variations in water flow and have a direct link to the overall performance of the fin and the board.\r | \r
\r | FLAT: A flat inside face combined with a convex outside face. The traditional flat sided foil offers an even combination of drive, pivot and hold and provides a very consistent, reliable feel over a wide variety of conditions. INSIDE: A sophisticated hydrodynamic foil consisting of a convex outside face, a rounded leading edge and a concaved inside face. Inside foil increases the efficiency of water flow over the surface of the fin adding lift and reducing drag. The result is a fin with more options through increased hold and speed. 50/50: A symmetrical foil used on all centre fins where both sides are convex. Even water flow on both sides creates stability and control. 70/30 or 80/20: Combines the performance of a centre and side fin offering increased speed, smooth rail-to-rail transitions and a consistent feel in a variety of conditions. (Ideal for all board types and rear fin placements) | \r